References: Complete List
The complete list of completed projects is available in the menu Projects
Paint mixing plant (BMS258)
Škoda Auto, Kvasiny, Czech Republic, 2026
Programming | Simatic
: New CC54 and HA55 station
: Application software Simatic S7-400, Simplicity visualisation
: Commissioning and start-up
Sheet Pile Marking Equipment
Vítkovice STEEL a.s., Czech Republic, 2026
Programming | Simatic, TIA portal
: Sheet pile marking (production data + QR code) using REA JET marking equipment
: Application software Simatic S7-1500, WinCC Unified Panel
: Integration into the straightener control system
: Commissioning and start-up
Cooling Boxes
SHM Šumperk, Czech Republic, 2026
Programming | Simatic, TIA portal
: Cooling boxes for controlled cooling of parts
: Application software Simatic S7-1500, WinCC Comfort Panel
: Commissioning and start-up
Automation of MGU component production (KM420 injection moulding machine, VL03)
Continental Jičín, Czech Republic, 2026
Programming | Simatic, WinCC, Kuka
: Automation at the KM420 injection moulding machine for MGU housing production - introduction of L/R production
: Application software Simatic S7-300, WinCC (Continental Standard)
: Cooperation with KUKA robots
: Commissioning and start-up
TGW Safety Doors
TGW Logistics Group, Austria, 2025
Programming | Simatic, TIA portal
: Transfer point for conveyed material (4x double-leaf doors, 1x single-leaf door)
: Application software Simatic S7-1200, WinCC Unified Panel
VIVA Assembly Station
ISOTRA a.s., Czech Republic, 2025
Programming | Simatic, TIA portal
: Riveting of the VIVA cover plate to the side panels and preparation of the required number of holes for brackets
: Application software Simatic S7-1500, WinCC Basic Panel, Mobile Panel
Air vent flap assembly station - JSW press
ITW Pronovia, Řepov, Czech Republic, 2025
Programming | Simatic, TIA portal
: Introduction of new production - Porsche E4
: Application software Simatic S7-1500, WinCC Comfort Panel
: Cooperation with ABB robots
Washing Machine Control System Upgrade
SPETRA CZ s.r.o., Czech Republic, 2025
Programming | Simatic, TIA portal
: Upgrade of the washing machine control system
: Application software Simatic S7-1500, WinCC Comfort Panel
: Communication with the company SQL order database
Andot Line – Service Support
SHM Šumperk, Czech Republic, 2025 - 2026
Programming | Simatic, TIA portal
: Improvement of line functions
: Application software Simatic S7-1500, WinCC Comfort Panel
: Communication with the company SQL order database
Air vent flap assembly station - Fiat 2
ITW Pronovia, Řepov, Czech Republic, 2025
Programming | Simatic, TIA portal
: Introduction of new production
: Application software Simatic S7-1500, WinCC Comfort Panel
: Cooperation with ABB robots
Laser welding of battery contacts
Saft Ferak a.s., Czech Republic, 2024 - 2025
Programming | Simatic, TIA portal
: Laser welding of contacts for various battery types
: Application software Simatic S7-1500, WinCC RT
Daimler welding station - software rework
ITW Pronovia, Řepov, Czech Republic, 2024
Programming | Simatic, TIA portal
: Software rework
: Application software Simatic S7-1200, WinCC Basic Panel
: Cooperation with the robot
Air vent flap assembly station - JSW press
ITW Pronovia, Řepov, Czech Republic, 2024
Programming | Simatic, TIA portal
: Introduction of new production - 9Y0
: Application software Simatic S7-1500, WinCC Comfort Panel
: Cooperation with ABB robots
JIDOKA system for KM420 presses
Continental Jičín, Czech Republic, 2023
Programming | Simatic, WinCC, Kuka
: Automation at the KM300 injection moulding machine for MGU cover production - 2+2 production
: Application software Simatic S7-300, WinCC (Continental Standard)
: Cooperation with a KUKA robot
L0600-CZ4 Line
EKT Litovel, Czech Republic, 2023
Programming | Simatic
: Correction of non-standard states of manipulator 3.2
: Application software Simatic S7-300
Andot Line
SHM Šumperk, Czech Republic, 2023 - 2024
Programming | Simatic, TIA portal
: Line for loading parts into bars before completion of the coating process
: Application software Simatic S7-1500, WinCC Comfort Panel
: Communication with the company SQL order database
Bukoza Energo - service activity
Bukoza Energo, Hencovce, Slovakia, 2023
Programming | Simatic, TIA portal
: Service activities for TG1 and TG3 turbines
: Application software Simatic S7-300, WinCC Comfort Panel
Production Overview and Production Administration PC
VELOX-WERK Hranice, Czech Republic, 2023
Programming | Simatic, Allen-Bradley
: Production overview – acquisition of data from control systems, storage in SQL database and visualisation, production planning
: Application software Simatic S7-1500, Allen-Bradley
: WinCC Comfort Panel, InTouch HMI
L0600-03 Line
EKT Litovel, Czech Republic, 2023
Programming | Simatic
: Introduction of production with 2/4 wires in the moulded part
: Application software Simatic S7-300
Switchgear panel replacement
Škoda Auto, Kvasiny, Czech Republic, 2023
Programming | Simatic, TIA portal
: Switchgear panel replacement (Siemens upgrade)
: Application software Simatic S7-400, WinCC Comfort Panel
Laser station at VL03 press
Continental Jičín, Czech Republic, 2023
Programming | Simatic, WinCC
: Laser printing upgrade (KM420)
: Application software Simatic S7-300, WinCC RT Panel
Stapling Station Upgrade
VELOX-WERK Hranice, Czech Republic, 2023
Programming | Simatic, WinCC (SCADA)
: Upgrade of UniOp panel to WinCC Unified Panel
: Application software Simatic S7-300, WinCC Unified Panel
PCS S7 Analysis for Migration to GEO SCADA SCX6
VAE CONTROLS, Czech Republic, 2023
: Analysis of WinCC SCADA – preparation of documentation for migration to GEO SCADA SCX6
Technical Assistance – NDMC Hyderabad Coke Oven Plant, India
HUTNÍ PROJEKT FRÝDEK-MÍSTEK, India, 2022
: Technical assistance during implementation of coke oven control automation
Bioelectric power plant - external steam distribution
Energy Edge, Žarnovica, Slovakia, 2022
Programming | TIA portal
: Control of additional steam distribution
: Application software Simatic S7-300, WinCC RT Panel
Automation of MGU component production (KM420 injection moulding machine, VL03)
Continental Jičín, Czech Republic, 2022
Programming | Simatic, WinCC, Kuka
: Automation at the KM420 injection moulding machine for MGU housing production - 2+2 production
: Application software Simatic S7-300, WinCC (Continental Standard)
: Cooperation with KUKA robots
: Commissioning and start-up
Automation of MGU component production (KM300 injection moulding machine, VL32)
Continental Jičín, Czech Republic, 2022
Programming | Simatic, WinCC, Kuka
: Automation at the KM300 injection moulding machine for MGU cover production - 2+2 production
: Application software Simatic S7-300, WinCC (Continental Standard)
: Cooperation with a KUKA robot
: Commissioning and start-up
Bioelectric power plant - visualisation replacement
Energy Edge, Žarnovica, Slovakia, 2022
Programming | TIA portal
: Replacement of the visualisation with WinCC RT
: Application software WinCC RT Advanced
KM300 - laser station upgrade
Continental Jičín, Czech Republic, 2022
Programming | Simatic, WinCC
: Upgrade of laser printing of MGU covers (TRUMPF)
: Application software Simatic S7-300, WinCC RT Panel
: Cooperation with KUKA robots
Velox – New Stapling Machine
Velox Werk Hranice, Czech Republic, 2021 - 2022
Programming | Simatic, TIA portal
: Line for production of welded staples for joining Velox construction boards
: Application software Simatic S7-1500, WinCC Comfort Panel
BMS261 - sill coating station upgrade
Škoda Auto, Kvasiny, Czech Republic, 2021
Programming | Simatic
: Replacement with KUKA robots, PLC S7-1500, InTouch visualisation
: Application software Simatic S7-1500, AVEVA InTouch HMI 2020R2
: Cooperation with KUKA robots, VW standard
MAGNEMAG Pipe Marking Line
Liberty Ostrava, Czech Republic, 2021 - 2022
Programming | Simatic, TIA portal
: Pipe marking line using coloured stripes and printing (stamping)
: Application software Simatic S7-1500, WinCC Comfort Panel
FS20 Line Upgrade
Robertshaw Šternberk, Czech Republic, 2021
Programming | Simatic, TIA portal
: Test line for pressure valves for washing machines
: Application software Simatic S7-200, Basic Panel visualisation
Bukoza Energo - service activity
Bukoza Energo, Hencovce, Slovakia, 2021
Programming | Simatic, TIA portal
: Service activities for TG1 and TG3 turbines
: Application software Simatic S7-300, WinCC Comfort Panel
Bioelectric power plant - boiler repair
Energy Edge, Žarnovica, Slovakia, 2020
Programming | Simatic
: Line software modification (PLC, visualisation)
: Application software Simatic S7-400, visualisation InTouch SP
Air vent flap assembly station - JSW press
ITW Pronovia, Řepov, Czech Republic, 2020 - 2021
Programming | Simatic, TIA portal
: Station for assembly of flaps into air vents (press, 4 robots, conveyor)
: Application software Simatic S7-1500, WinCC Comfort Panel
: Cooperation with ABB robots
IMI – Phoenix Coil Pressing
IMI Precision Engenering Brno, Czech Republic, 2020
Programming | Simatic, TIA portal
: Phoenix coil pressing station
: Application software Simatic S7-1500, WinCC Comfort Panel
Ultrasonic welding of leatherette to plastic frames
Plastika Kroměříž, Czech Republic, 2019
Programming | Simatic, TIA portal
: Ultrasonic welding of leatherette to plastic frames using ABB robots
: Application software Simatic S7-1500, WinCC Comfort Panel
: Cooperation with ABB robots
HELLA - headlamp assembly (PCB, heat sink, mask) - E310
HELLA Autotechnik NOVA, Czech Republic, 2019
Programming | Simatic, TIA portal
: Station for assembly of headlamp components (2x ABB robot, left/right)
: Application software Simatic S7-1500, WinCC Comfort Panel
: Cooperation with ABB robots
Dina-Hitex – Folding of Medical Face Masks
Dina-Hitex Brno, Czech Republic, 2019
Programming | Simatic, TIA portal
: Station for folding medical face masks
: Application software Simatic S7-1500, WinCC Comfort Panel
Air vent flap assembly station - POLO
ITW Pronovia, Řepov, Czech Republic, 2019
Programming | Simatic, TIA portal
: Station for assembly of flaps into air vents (press, 5 robots, rotary table, conveyor)
: Application software Simatic S7-1500, WinCC Comfort Panel
: Cooperation with Stäubli robots
Vertical Support Jaguar L554
RAMA Bohemia, Czech Republic, 2019
Programming | Simatic, TIA portal
: Assembly of clips and inserts into a sheet-metal part (press, 2 robots, conveyor technology)
: Application software Simatic S7-1500, WinCC Comfort Panel
: Cooperation with KUKA robots
Conveyor Technology – Pohořelice, Jažlovice
DHL Solutions, Czech Republic, 2019
Programming | Simatic, TIA portal
: Conveyor technology at the Pohořelice and Jažlovice sites
: Application software Simatic S7-1500, WinCC Comfort Panel
BMS213 - Decor line
Škoda Auto, Kvasiny, Czech Republic, 2019
Programming | Simatic, TIA portal
: Decor line upgrade
: Application software Simatic S7-400, WinCC Comfort Panel
Transfer station reconstruction
Škoda Auto, Kvasiny, Czech Republic, 2019
Programming | Simatic, TIA portal
: Transfer station reconstruction - software
: Application software Simatic S7-400, WinCC Comfort Panel
Manipulator for KM420
Continental Jičín, Czech Republic, 2018
Programming | Simatic, WinCC, Kuka
: Automation at the KM420 injection moulding machine - loading and unloading of materials and finished parts
: Application software Simatic S7-300, WinCC (Continental Standard)
: Cooperation with KUKA robots
: Commissioning and start-up
Operator station upgrade on TG3
Bukoza Energo, Slovakia, 2018
Programming | Simatic, TIA portal
: HW+SW upgrade of the WinCC RT operator station (SCADA) from 6.2 to 7.4
: WinCC Scada 7.4
Ultrasonic welding of leatherette to plastic frames
Plastika Kroměříž, Czech Republic, 2018
Programming | Simatic, TIA portal
: Ultrasonic welding of leatherette to plastic frames using ABB robots
: Application software Simatic S7-1500, WinCC Comfort Panel
Laser cutting of leatherette for car dashboards
Plastika Kroměříž, Czech Republic, 2018 - 2019
Programming | Simatic, TIA portal
: Laser cutting of leatherette for car dashboards
: Application software Simatic S7-1500, WinCC Comfort Panel
HMMC - commissioning of reporting points
HMMC Nošovice, Czech Republic, 2018
Programming | Simatic
: Commissioning of reporting points on the line - communication
: Application software Simatic S7-400
Air vent flap assembly for Fiat and Sharan
ITW Pronovia, Czech Republic, 2018 - 2019
Programming | Simatic, TIA portal
: Automation of a line with 6 robots
: Application software Simatic S7-1500, WinCC Comfort Panel
: Cooperation with ABB robots
: Delivery of 4 lines in total
BMS242 - WWTP sand filters
Škoda Auto, Kvasiny, Czech Republic, 2018
Programming | Simatic
: Reconstruction of sand filters at the paint shop WWTP
: Application software Simatic S7-400, visualisation InTouch
BMS230 - K800 filter press upgrade
Škoda Auto, Kvasiny, Czech Republic, 2018
Programming | Simatic
: Filter press upgrade in the paint shop
: Application software Simatic S7-400, WinCC Basic panel
: Upgrade, commissioning and start-up
Bioelectric power plant - boiler software modifications
Energy Edge, Žarnovica, Slovakia, 2018 - 2019
Programming | Simatic, InTouch
: Boiler software modification - PLC S7-400
: Application software Simatic S7-400, visualisation InTouch SP
Smart operator panels
Škoda Auto, Kvasiny, Czech Republic, 2018
Programming | Simatic
: Operator panel upgrade
: TIA portal, WinCC Comfort panels
WWTP software modifications
Škoda Auto, Kvasiny, Czech Republic, 2018
Programming | Simatic
: Control and visualisation modifications
: Application software Simatic S7-400, visualisation InTouch
Experimental Coke Oven
Třinecké železárny, Czech Republic, 2017
Programming | Simatic, TIA portal
: Automation of a miniature experimental coke oven
: Application software Simatic S7-1500, WinCC Comfort Panel
: Commissioning and start-up
BMS233 - UBS Dryer, BMS215 - Yeti
Škoda Auto, Kvasiny, Czech Republic, 2017
Programming | Simatic
: Software work, teamwork
: Application software Simatic S7-400
: Line upgrade, commissioning (CZD)
ICAM-4 Assembly Line for Washing Machine VT Valves
Robertshaw Šternberk, Czech Republic, 2017
Programming | Simatic, TIA portal
: Automated production of VT valve components for washing machines
: Application software Simatic S7-1500, WinCC Comfort Panel
: Line upgrade
CCC Daimler - RHD cell + two-position cell
Daimler, Czech Republic, 2017
Programming | Simatic, TIA portal
: Automated cells
: Application software Simatic S7-1500, WinCC Comfort Panel
: Commissioning and start-up
JIH gas mixing station
Energertika Třinec a.s., Czech Republic, 2017
Programming | Simatic
: Mixing station for blast-furnace, coke-oven and converter gas
: Application software 4x S7-300
: Commissioning and start-up
Rohwedder Valve Production Line
Robertshaw Šternberk, Czech Republic, 2017
Programming | Simatic, TIA portal
: Pre-assembly of the Guide component for production of washing machine valves
: Application software Simatic S7-1500, WinCC Comfort Panel
: Commissioning and start-up
Robotic line for windshield washer reservoir production
Continental Adršpach, Czech Republic, 2017
Programming | Simatic, TIA portal
: Automation at the injection moulding machine for windshield washer reservoir production
: Application software Simatic S7-1200, WinCC Comfort Panel
: Cooperation with a KUKA robot
TG3 overhaul
Bukoza Energo, Hencovce, Slovakia, 2017
Programming | Simatic, WinCC (Scada)
: Control system for regulation and protection of equipment in the TG3 turbine hall
: Visualisation in the DCS system
: Application software Simatic S7-300, WinCC
: Communication with ABB (IEC 61850)
: Commissioning and start-up
Automation of MGU component production (KM420 injection moulding machine)
Continental Jičín, Czech Republic, 2017
Programming | Simatic, WinCC, Kuka
: Automation at the KM420 injection moulding machine for MGU housing production (Motor Gear Unit)
: Application software Simatic S7-300, WinCC (Continental Standard)
: Cooperation with KUKA robots
: Commissioning and start-up
Automation of MGU component production (KM300 injection moulding machine)
Continental Jičín, Czech Republic, 2017
Programming | Simatic, WinCC, Kuka
: Automation at the KM300 injection moulding machine for MGU cover production (Motor Gear Unit)
: Application software Simatic S7-300, WinCC (Continental Standard)
: Cooperation with a KUKA robot
: Commissioning and start-up
Paint shop - automotive production service support
Škoda Auto, Kvasiny, Czech Republic, 2017 - 2018
Service | Simatic, WinCC, InTouch,Kuka
: Service activities, production support
: Application software Simatic S7-300,400, WinCC, InTouch, Kuka
Bosch station
MAPRO Olomouc, Czech Republic, 2016
Programming | Simatic
: BOSCH loading station
: Application software Simatic S7-1200
Four-position welding cell
Daimler, Poland, 2016 - 2017
Programming | Simatic, WinCC, Kuka
: Automation of a four-position robotic welding cell
: Application software Simatic S7-1500, WinCC
: Cooperation with KUKA robots
VW536 station
MAPRO Olomouc, Czech Republic, 2016
Programming | Simatic,WinCC
: W536 assembly and inspection station
: Application software Simatic S7-1200, WinCC
Two-position welding cell
Daimler, Poland, 2016 - 2017
Programming | Simatic, WinCC, Kuka
: Automation of a two-position robotic welding cell
: Application software Simatic S7-1500, WinCC
: Cooperation with KUKA robots
Dynamic path adjustment of ABB robots
Hyundai Dymos Nošovice, Czech Republic, 2016
Programming | Simatic, WInCC, ABB
: Dynamic adjustment of ABB robot paths via operator panel
: Application software VIPA-300, WinCC, ABB
Migration of local turbine visualisation to the control room
Biocel Paskov, Czech Republic, 2016
Programming | Simatic, WinCC
: Migration of MP377 operator panel to WinCC Flexible RT2008
Paint shop - capacity expansion + conveyor modifications
Škoda Auto, Kvasiny, Czech Republic, 2016
Programming | Simatic, InTouch
: Application software modifications - production optimisation
: Application software Simatic S7-300, WinCC
Paint shop - sill cover plates
Škoda Auto, Kvasiny, Czech Republic, 2016
Programming | Simatic, InTouch
: Automation upgrade of cover plates during protective sill coating
: Application software Simatic S7-300, upgrade InTouch (v9.5 -> 10.4)
Paint shop - buffer automation upgrade
Škoda Auto, Kvasiny, Czech Republic, 2016
Programming | Simatic, WinCC, FIS Optimo
: Optimisation of vehicle organisation in buffers
: Application software Simatic S7-300, WinCC, FIS Optimo
Automation of MGU component production (2x KM420 injection moulding machine)
Continental Jičín, Czech Republic, 2016
Programming | Simatic, WinCC, Kuka
: Automation at the KM420 injection moulding machine for MGU housing production (Motor Gear Unit)
: Application software Simatic S7-300, WinCC (Continental Standard)
: Cooperation with KUKA robots
: Commissioning and start-up
Automation of MGU component production (2x KM300 injection moulding machine)
Continental Jičín, Czech Republic, 2016
Programming | Simatic, WinCC, Kuka
: Automation at the KM300 injection moulding machine for MGU cover production (Motor Gear Unit)
: Application software Simatic S7-300, WinCC (Continental Standard)
: Cooperation with a KUKA robot
: Commissioning and start-up
Primary power control - certification tests
Bukoza Energo, Hencovce, Slovakia, 2016
Programming | Simatic, WinCC (Scada)
: Preparation and execution of primary power control certification tests
: Application software Simatic S7-300, WinCC
Production line automation software modifications
Varroc Lighting Systems N.Jičín, Czech Republic, 2016
Programming | Simatic, Kuka
: Software modification of the lamp production line
: SW Simatic S7-300, KUKA
Coke Oven Gas Desulphurisation
US Steel Košice, Slovakia, 2016
Supervision
: Start-up of the Claus reactor after general overhaul
: Controlled drying and heating of the reactor
Robertshaw Service Support
Robertshaw Šternberk, Czech Republic, 2016
Programming | Simatic,WinCC
: Service interventions to repair or improve the ergonomics of machines transferred from abroad
: Application software Simatic S7-200, S7-300, S5-95U, S5-115U, WinCC
: Czech localisation and upgrade of operator panels
: Software analyses and repairs where required (S5)
Cooling towers
Bukoza Energo, Hencovce, Slovakia, 2016
Programming | Simatic, WinCC (Scada)
: Control system for cooling towers of the TG3 turbine condensing circuits
: Application software Simatic S7-300, WinCC
Paint shop - InTouch visualisation upgrade
Škoda Auto, Kvasiny, Czech Republic, 2016
Programming | InTouch
: InTouch visualisation upgrade in the application section (v9.5 -> 10.4)
Turbogenerator protection control
Mondi Group, Ružomberok, Slovakia, 2016
Programming | Simatic, WinCC
: TG2 turbogenerator protection
: Application software Simatic S7-300, WinCC
: Communication with DCS via Modbus RTU
: Commissioning and start-up
Boiler burner automation
Alpiq Zlín, Czech Republic, 2015
Programming | Simatic
: Migration of K21 boiler burner control to a new PLC
: Application software Simatic S7-300
Automotive production service support
Škoda Auto, Kvasiny, Czech Republic, 2015 - 2016
Service | Simatic, Kuka
: Service activities, production support
MCHZ Test Reactor
BorsodChem MCHZ, Czech Republic, 2015
Programming | Simatic, InTouch
: Control of the nitric oxide disposal process in the reactor
: Application software Simatic S7-1200, InTouch
TG1 start-up after overhaul
Bukoza Energo, Hencovce, Slovakia, 2015
Supervision | Simatic, WinCC (Scada)
: Commissioning and start-up of the turbogenerator after overhaul
Paint shop - APT technology modifications
Škoda Auto, Kvasiny, Czech Republic, 2015
Programming | Simatic, WinCC
: Modification of the original software
: Commissioning and start-up
Experimental Coke Oven
Thyssen Duisburg, Germany, 2015
Programming | Simatic, WinCC
: Control of an experimental coke oven for technological purposes
: Application software Simatic S7-300, WinCC
: Commissioning and start-up
Heat accumulator
Agras Želatovice, Czech Republic, 2015
Programming | Simatic, InTouch
: Use of flue-gas heat for storage in an oil medium
: Application software Simatic S7-300, InTouch
Paint shop - roof channel sealing
Škoda Auto, Kvasiny, Czech Republic, 2015
Programming | Simatic
: Visualisation at the robotic roof channel sealing station
: Application software InTouch, Simatic S7-300
: Organisation of the type database in PLC and InTouch
Welding cell
Federal-Mogul Friction Products, Czech Republic, 2015
Programming | Simatic, WinCC
: Automation of a robotic welding cell
: Application software Simatic S7-300, WinCC
: Cooperation with KUKA robots
COMEC automatic grinder
Federal-Mogul Friction Products, Czech Republic, 2015
Programming | Simatic, WinCC
: Automation of the grinding line
: Application software Simatic S7-300, WinCC
: Commissioning and start-up
Boiler K14
ArcelorMittal Ostrava, Czech Republic, 2015
Programming | Simatic
: Participation in development of the K14 boiler control automation
: Application software for PLC Simatic S7-400H
: Commissioning and start-up
: General contractor VALMET
Ladle Furnace No. 2
ŽĎAS, Žďár n/S, Czech Republic, 2015
Programming | InTouch
: Upgrade of ladle furnace No. 2 technology
: Application software InTouch
Automation of MGU component production (1x KM300 injection moulding machine)
Continental, ChangShu, China, 2014 - 2015
Programming | Simatic, WinCC, Kuka
: Automation at the KM300 injection moulding machine for MGU cover production (Motor Gear Unit)
: Application software Simatic S7-300, WinCC (Continental Standard)
: Cooperation with a KUKA robot
: Commissioning and start-up
Automation of MGU component production (2x KM420 injection moulding machine)
Continental, ChangShu, China, 2014 - 2015
Programming | Simatic, WinCC, Kuka
: Automation at the KM420 injection moulding machine for MGU housing production (Motor Gear Unit)
: Application software Simatic S7-300, WinCC (Continental Standard)
: Cooperation with KUKA robots
: Commissioning and start-up
Heating and Cooling of Hood Furnaces
DUO BRASS Mils, Pákistán, 2014 - 2016
Programming | Simatic,WinCC
: Control of heating/cooling of hood furnaces
: Application software Simatic S7-300, WinCC
: Commissioning and start-up
Rolling Mill Control Upgrade
DUO BRASS Mils, Pákistán, 2014 - 2016
Programming | Simatic, WinCC
: Automation of the rolling stand
: Application software Simatic S7-300, WinCC
: Commissioning and start-up
Battery Tube robotic welding cells
Kirchhoff Polska, Poland, 2014
Programming | Simatic,WinCC
: Automation of a robotic welding cell
: Application software Simatic S7-300, WinCC
: Commissioning and start-up
Food Processing Line for Noodle Production
Altin JM, Frýdek-Místek, Czech Republic, 2014
Programming | Simatic
: Reconstruction and modernisation of the food processing line
: Application software Simatic S7-300
: Commissioning and start-up
Robotic Painting of Motor Covers
Siemens Frenštát, Czech Republic, 2014
Programming | Simatic, WinCC, Kuka
: Coordination of two robots during automated paint spraying of motor covers
: Application software Simatic S7-300, WinCC
: Safety Profinet
Back-pressure turbine
TG Hajnówka, Poland, 2012 - 2013
Programming | Simatic, WinCC
: Back-pressure turbine, turbine commissioning
: PLC Simatic S7300
: Visualisation WinCC
Body shop - floor welding - Octavia 3
Škoda Auto, Mladá Boleslav, Czech Republic, 2012 - 2014
Programming | Simatic, WinCC
: Participation in commissioning and start-up, production support
: Simatic S7 319-F, Profinet, WinCC Flexible 2008
: VW standard SK251, 37x
: Communication with the Sicalis system
Longitudinal member welding for Skoda Octavia 3
KWD Dobrovice (Mladá Boleslav), Czech Republic, 2012 - 2014
Programming | Simatic, WinCC
: Simatic S7 319-F, Profinet, WinCC Flexible 2008
: VW standard SK37x
6 MW turbogenerator control - regulation and protection
TG Nadia Chekka, Lebanon, 2012 - 2013
Programming | Simatic, WinCC (Scada)
: 6 MW turbogenerator (back-pressure turbine, upgrade and commissioning)
: PLC Simatic S7400
: Visualisation WinCC
Bioelectric power plant
Energy Edge, Žarnovica, Slovakia, 2011 - 2014
Programming | Simatic, Wonderware
: Application software for PLC Simatic S7-400 - boiler
: Application software for PLC Simatic S7-300 - transport
: Application software for PLC Simatic S7-300 - heat pumps
: Wonderware System Platform (InTouch, WHS, WIS) for boiler, turbine and transport
Reconstruction and Upgrade of Soaking Pits
Sochorová válcovna TŽ, Kladno, Czech Republic, 2011 - 2012
Programming | Simatic, InTouch
: Control of automatic heating of 12 soaking pit chambers according to 5 possible scenarios
: 2x Simatic S7-300, Profibus
: 2x InTouch visualisation
Conveyor Line for Distribution, Strapping and Packaging of Paper Pallets
Olšanské papírny, Czech Republic, 2011 - 2012
Programming | Simatic, WinCC, InTouch
: Simatic S7-300, Profibus, WinCC Flexible 2008, InTouch
: Communication with the company information system
Body shop - front and rear floors - Rapid, Octavia
Škoda Auto, Mladá Boleslav, Czech Republic, 2011 - 2014
Programming | Simatic, WinCC
: Welding of front and rear floors + assembly of cross panels for Skoda Rapid and Octavia 3 bodies
: Simatic S7 319-F, Profinet, WinCC Flexible 2008
: Simatic S7 IM 181
: VW standard SK251, 37x
: Communication with the Sicalis system
Body shop - Yeti production
Škoda Auto, Kvasiny, Czech Republic, 2011
Programming | Simatic, WinCC, Kuka
: Yeti body production line
: Application software Simatic S7-300, WinCC
: Cooperation with KUKA robots
: Commissioning and start-up
Body shop - Yeti integration into Roomster line
Škoda Auto, Kvasiny, Czech Republic, 2011
Programming | Simatic, WinCC
: Construction of SK316 - YETI, integration of YETI into the existing ROOMSTER line
: Simatic S7 319-F, Simatic S7 416-DP
: WinCC visualisation, Interbus, Profinet
TG1 - turbogenerator control - regulation and protection
Bukoza Energo, Hencovce, Slovakia, 2011
Programming | Simatic, WinCC (Scada)
: TG1 turbogenerator - upgrade (software development and commissioning)
: 2x PLC Simatic S7300
: Visualisation WinCC
Coke Oven Gas Desulphurisation
U.S.Steel Košice, Slovakia, 2010 - 2011
Programming | Simatic, InTouch
: The most significant investment at U.S. Steel in 2010 – construction of two coke oven gas desulphurisation lines
: Responsibility for the control system and I&C scope of the project
: PLC Simatic S7-400, Wonderware Application Server (3 SP), InTouch visualisation, Historian Server
Body shop - Superb side panel production
Škoda Auto, Kvasiny, Czech Republic, 2009 - 2010
Programming | Simatic, WinCC
: Construction of SK45x side panels - B6 Limousine, Combi
: Simatic S7 417-DP
: WinCC visualisation
: Interbus
Automotive production service support
Škoda Auto, Kvasiny, Czech Republic, 2009 - 2011
Service | Simatic, Kuka
: Service activities, production support (paint shop, body shop)
: Cooperation with KUKA robots
Coke Oven Gas Desulphurisation
Koksovna Jana Švermy, Ostrava, Czech Republic, 2009 - 2010
Programming | Simatic, InTouch
: Reconstruction and upgrade of the original Simatic S5 control system to Simatic S7 control systems (6x S7-300) and 4x InTouch visualisation stations
: Profinet network
Wastewater Treatment
Diamo s.p. Dolní Rožinka, Czech Republic, 2009
Programming | Simatic
: Application software for control of wastewater treatment technology (Simatic S7-400)
Charging Car for Coke Oven Battery No. 3
U.S.Steel Košice, Slovakia, 2009
Programming | Simatic
: Upgrade of the control system of charging car No. 1 for coke oven battery No. 3
: Simatic S7-300 control system
BMW lock test bench
Brose CZ, Kopřivnice, Czech Republic, 2009
Programming | Simatic, TP177
: Production of a test bench for BMW E90 and R56 locks
: Simatic S7-200 control system, operation via TP177 Micro Touch Panel
: Testing of up to 10 locks simultaneously, freely programmable tests and functions
TG3 - turbogenerator control - regulation and protection
Bukoza Energo, Hencovce, Slovakia, 2008
Programming | Simatic, WinCC (Scada)
: Turbogenerator - upgrade (software development and commissioning)
: 1x Simatic S7400
: Visualisation WinCC
: Industrial Ethernet
Control System Upgrade for Cooling Tower and Fine Condensation Plants
Koksovna Jana Švermy, Ostrava, Czech Republic, 2008
Programming | Simatic, InTouch
: Control system upgrade (S5 -> S7, InTouch)
: 1x Simatic S7-300
: InTouch visualisation
: Industrial Ethernet
Heating and Drying of Transfer Ladles
U.S.Steel Košice, Slovakia, 2008
Programming | Simatic, InTouch
: Control system upgrade (S5 -> S7, InTouch)
: 1x Simatic S7-300
: InTouch visualisation
: Industrial Ethernet
Hyundai - service support
Hyundai, Nošovice, Czech Republic, 2008 - 2009
Programming | Simatic
: Simatic S7300/400
: Instrumentation, Industrial Ethernet, Profibus DP
: Engineering
Particleboard Production Line
Dřevařský podnik Burgas, Bulgaria, 2008
Programming | Simatic
: 2x Simatic S7-400
: 1x Simatic S7-300
: Industrial Ethernet, Profibus DP
30 MW turbogenerator control - regulation and protection
Cukrovar Broadwater, Australia, 2008
Programming | Simatic, WinCC (Scada)
: 30 MW condensing turbine
: Turbine protection system (S7-400)
: Turbine control system (S7-400)
: WinCC visualisation
: Synchronisation with generator connection points
30 MW turbogenerator control - regulation and protection
Cukrovar Condong, Australia, 2007
Programming | Simatic, WinCC (Scada)
: 30 MW condensing turbine
: Turbine protection system (S7-400)
: Turbine control system (S7-400)
: WinCC visualisation
: Synchronisation with generator connection points
Paint shop - body waxing
Škoda Auto, Kvasiny, Czech Republic, 2007
Programming | Simatic, InTouch
: 3 waxing stations (Roomster, Fabia, Superb)
: Simatic S7 400, profibus DP
: Visualisation in InTouch (3 stations)
: Communication with the Sicalis system
Turbogenerator protection - 36.2 MW condensing turbine
Papírny YFY GROUP, Yangzhou, China, 2007
Programming | Simatic, WinCC (Scada)
: Turbine protection system (S7-400)
: Turbine control system (S7-400)
: WinCC visualisation
: Synchronisation with generator connection points
: Modbus communication with the HV system
Sawdust Dryer
Dřevařský podnik Tarnovo, Bulgaria, 2007 - 2008
Programming | Simatic
: 6x PLC Simatic S7-300
: Industrial Ethernet, Profibus DP
Parallel operation of two 8.2 MW turbogenerators
Cukrovar Kayseri, závod Bogazliyan, Turkey, 2007
Commissioning | Simatic
: 2 back-pressure turbines, 8.2 MW, in parallel operation
: Supervision during sugar beet campaign start-up
Parallel operation of two 8.2 MW turbogenerators
Cukrovar Kayseri, závod Bogazliyan, Turkey, 2006 - 2007
Programming | Simatic, WinCC (Scada)
: Back-pressure turbines 8.2 MW (2 units)
: Turbine protection system (S7-400H)
: Turbine control system (S7-400H)
: Synchronisation with generator connection points
: WinCC visualisation (2 stations)
50 MW condensing turbine
Papírny Štětí, Czech Republic, 2006
Commissioning | Simatic
: Participation in commissioning of the turbine protection system (Simatic S7-400)
Reconstruction of the Sawing Section
Sochorová válcovna TŽ, Kladno, Czech Republic, 2006 - 2007
Programming | Simatic, InTouch
: Optimisation of cooling bed movement control
: Drive upgrade in the discharge section
: Application software for Simatic S7-400
: InTouch visualisation
Pellet combustion
Škoda Auto, Mladá Boleslav, Czech Republic, 2006
Programming | Simatic, TP170
: Application software for Simatic S7-300
: WinCC visualisation on TP170 Touch Panel
Pipeline Relocation – Control System for TG Plants
Koksovna Jana Švermy, Ostrava, Czech Republic, 2006
Programming | Simatic, InTouch
: Integration of the demineralised-water control system into the desulphurisation system (Simatic S5, InTouch)
TPCA - application optimisation for increased production
TPCA Kolín, Czech Republic, 2005 - 2006
Programming | VB.NET, MS SQL
: Information and database systems for quality and production organisation (VB.NET, MS SQL)
Automotive door lock durability testing
Brose CZ, Kopřivnice, Czech Republic, 2006
Programming | Simatic, TP170
: Delivery of equipment for BMW R56 and E90 door lock testing
: Operator communication via TP170 Touch Panel
: Simatic S7-200 control system
Fuel storage yard spraying system
Dalkia Krnov, Czech Republic, 2006
Programming | Simatic, TP170
: Application software for Simatic S7-300 - storage yard spraying
: Visualisation and control via TP170 Touch Panel
Body shop, conveyor technology
Škoda Auto, Kvasiny, Czech Republic, 2006
Programming | Simatic, Kuka
: Application software for Simatic S7-400 - conveyor technology
: Application software for KUKA robots (welding and handling)
: Line maintenance, production support for training Skoda personnel
Paint shop, conveyor technology
Škoda Auto, Kvasiny, Czech Republic, 2005
Programming | Simatic, Kuka, InTouch
: Application software for Simatic S7-400 - Superb and Roomster conveyor technology
: Application software for KUKA robots
: InTouch visualisation - Roomster waxing station
: Cooperation with Siemens
Benzol Washer, Loading and Stripper
Koksovna Jana Švermy, Ostrava, Czech Republic, 2005
Programming | Simatic, InTouch
: Application software for Simatic S7-300 – control of the benzol washer, stripper, wastewater system and benzol loading into tankers
: Application software for InTouch visualisation
: Cooperation with Siemens Ostrava
Third Saw for Hot Billet Cutting
Sochorová válcovna TŽ, Kladno, Czech Republic, 2005
Programming | Simatic, InTouch
: Application software for Simatic S7-300 – cooperation of two saws during simultaneous billet cutting
: Application software for InTouch visualisation
: Cooperation with Autel and Třinecký inženýring
VW car body shop
Volkswagen Bratislava, Slovakia, 2004 - 2005
Programming | Simatic, Kuka
: Application software for Simatic S7-300
: Application software for KUKA robots
: Cooperation with Siemens
TPCA - assembly information system
TPCA Kolín, Czech Republic, 2004 - 2005
Programming | Visual Basic.NET, MS SQL, Simatic.NET
: Application software for Assembly Shop (Visual Basic.NET, MS SQL, Simatic.NET)
: Main Controller - connection of the assembly information system to the central server
: Quality database - production quality monitoring
: Quality monitoring - assembly quality control at the inspection department
: Andon Report database - monitoring production flow and labour productivity
: Traceability Poka-Yoke - monitoring execution of selected work operations
: Cooperation with Siemens
Billet Ovality Measurement
Sochorová válcovna TŽ, Kladno, Czech Republic, 2003 - 2004
Programming | Simatic, InTouch
: Simatic S7-300 application software for movement control of the measuring-head manipulator according to the measuring plan
: InTouch visualisation including communication with the rolling mill MES (SQL Server)
: Cooperation with Třinecký Inženýring a.s.
Body shop, conveyor technology
Škoda Auto, Mladá Boleslav, Czech Republic, 2003 - 2005
Programming | Simatic, Kuka
: Application software for Simatic S7-300 - conveyor technology
: Application software for KUKA robots (welding and handling)
: Communication between welding robots (Interbus, Profibus)
: Cooperation with Siemens
Control System Upgrade – Stage 2
Sochorová válcovna TŽ, Kladno, Czech Republic, 2003
Programming | Simatic, InTouch
: Simatic S7-300 application software for control of the saw section, collecting bed and cooling beds
: Simatic S7-300 application software for material-flow tracking, replacement of relay panels and Simatic S3
: InTouch visualisation
: Cooperation with Třinecký Inženýring a.s. and Autel a.s.
Body shop, conveyor technology
Škoda Auto, Mladá Boleslav, Czech Republic, 2003 - 2005
Programming | Simatic, Kuka
: Application software for Simatic S7-300 - conveyor technology
: Application software for KUKA robots (welding and handling)
: Communication between welding robots (Interbus, Profibus)
: Cooperation with Siemens
Rolling Stand – Roll Adjustment
Sochorová válcovna TŽ, Kladno, Czech Republic, 2002 - 2003
Programming | Simatic, InTouch
: Simatic S7-400 application software for roll positioning control of stands 1, 2 and 3
: Simatic S7-400 application software for material-flow tracking
: InTouch visualisation
: Cooperation with Třinecký Inženýring a.s. and Autel a.s.
Compressor Station
Spolana Neratovice a.s., Czech Republic, 2002
Programming | Promotic
: Compressor station visualisation using the Promotic system
: Cooperation with E&A Mladá Boleslav
Car body shop - AUDI A3
Audi, Ingolstadt, Germany, 2002
Programming | Simatic, WinCC
: Application software for Simatic S7-400 for material handling and welding robot control
: Communication between welding robots (Interbus, Profibus)
: Siemens WinCC visualisation
: Cooperation with Siemens
Pre-complex and complex tests - Temelin NPP Unit 2
Škoda Praha, Czech Republic, 2001 - 2003
Commissioning | Westinghouse
: Technical assistance during pre-complex and complex testing of Unit 2
: Support during power start-up tests
: Cooperation with UNIS s.r.o., Brno and Skoda Praha a.s.
Cooling Tower Control
Osram Bruntál, Czech Republic, 2001
Programming | Simatic, TD 200
: Delivery of SIMATIC S7-200 + TD 200 application software
: Cooperation with Elektromont Brno a.s. and MURAS
Control system for lock testing
Bosch Diesel, Czech Republic, 2001
Programming, complete delivery | Amit
: Complete delivery of the control system and test frame for lock testing
: AMIRIS 99 (Amit) control system, Promotic visualisation
: Frame made of BOSCH profiles, FESTO pneumatics
Converter Gas Holder Control System Upgrade
Energetika Třinec, Czech Republic, 2001
Programming | Simatic
: Delivery of SIMATIC S5 135U application software
: Cooperation with Energetika Třinec a.s.
General Overhaul of the Gas Mixing Station Control System
Energetika Třinec, Czech Republic, 2001
Programming | Simatic
: Delivery of SIMATIC S5 135U application software
: Cooperation with Energetika Třinec a.s.
Industrial Hall Heating
Osram Bruntál, Czech Republic, 2001
Programming | Simatic, TD 200
: Delivery of SIMATIC S7-200 + TD 200 application software
Heat Treatment Line (Quenching and Tempering Furnaces)
Třinecké železárny, Czech Republic, 2001
Programming | Simatic, InTouch
: Delivery of SIMATIC S7-300 hardware and software (Profibus) + InTouch visualisation
: Communication S7-300 – CP541 – S5-115U
: Cooperation with Třinecký inženýring a.s.
Car paint shop - production support
Škoda Auto, Kvasiny, Czech Republic, 2001
Programming | Simatic
: Software maintenance for SIMATIC S7-300 (+Interbus, Profibus)
: Cooperation with Siemens Industrial Services Ostrava and DEL a.s.
Car body shop - Superb door frames
Škoda Auto, Kvasiny, Czech Republic, 2001
Programming | Simatic
: Welding of Skoda Superb door frames
: Software delivery for SIMATIC S7-300 (+Interbus)
: Cooperation with Siemens Industrial Services Ostrava and DEL a.s.
Automotive door lock durability testing
Bosch Diesel, Czech Republic, 2000 - 2001
Programming, complete delivery | Amit
: Complete delivery of the control system and test frame for lock testing
: AMIRIS 99 (Amit) control system, Promotic visualisation
: Frame made of BOSCH profiles, FESTO pneumatics
Pre-complex and complex tests - Temelin NPP Unit 1
Škoda Praha, Czech Republic, 2000 - 2003
Commissioning | Westinghouse
: Technical assistance during pre-complex and complex testing of Unit 1
: Support during power start-up tests
: Cooperation with UNIS s.r.o., Brno and Skoda Praha a.s.
Fine Scale Dewatering
Vítkovice, Czech Republic, 1999 - 2001
Programming, I&C delivery | Simatic, FactoryLink
: Delivery of a SIMATIC S7-400 based control system
: FactoryLink visualisation (US Data)
: I&C delivery
: Cooperation with Mariánskohorská a.s., Třinecká společnost W&W and Ingelectric a.s.
Rail Straightener
Třinecké železárny, Czech Republic, 1999
Programming | InTouch
: Delivery of InTouch visualisation software for the rail straightener (replacement of the existing visualisation)
: Cooperation with TŽ inženýring a.s.
HCl Regeneration Station
Baoshan Iron Steel, China, 1999
Programming | InTouch
: Delivery of InTouch visualisation software for the new regeneration station (3 operator stations + 1 engineering station)
: Cooperation with Autel a.s.
Energy Consumption Measurement
Koksovna Jana Švermy, Ostrava, Czech Republic, 1999
Programming | Simatic
: Delivery of application software for the existing KJŠ desulphurisation system
: Cooperation with Hutní projekt Frýdek-Místek a.s. and ElektroMar Ostrava a.s.
Private Villa Automation
soukromá osoba, Czech Republic, 1999
Programming | Amit
: Automation of the villa boiler room and other modern-house functions; control system based on AMAP 98
: Cooperation with V. Venclík – Elektoservis, Nová Hospoda and AMIT, s.r.o., Praha
Secondary Dedusting of Converter K1
Vítkovice, Czech Republic, 1999
Programming | Simatic, Coros
: Delivery of SIMATIC S5 based control and I&C system, COROS visualisation (WF 470)
: Cooperation with Třinecká společnost W&W
Converter Gas Holder
Vítkovice, Czech Republic, 1999
Programming | ControlWeb
: New Control Web based visualisation, modification of gas mixing station control and new connection to rolling mills
Fine Condensation Plant Reconstruction
Koksovna Jana Švermy, Ostrava, Czech Republic, 1998
Programming | Simatic, InTouch
: Delivery and commissioning of the control system including visualisation
: Control system based on S5 135U and S5 115U with InTouch visualisation; Industrial Ethernet (SINEC H1) and SINEC L1 communication
: Cooperation with Hutní projekt Frýdek-Místek, a.s. and Dodávky automatizace, s.r.o. Ostrava
Refinery – LPG Storage Tanks
SOPC Suez, Egypt, 1998
Commissioning | Simatic
: Commissioning of instrumentation and control, comprehensive testing of the LPG storage tank technology
: Cooperation with TECHNOEXPORT Praha and Vítkovice, a.s.
Coke Oven Battery Flue Gas Control
Koksovna Jana Švermy, Ostrava, Czech Republic, 1998
Programming | Simatic, InTouch
: Delivery of application software for the control system designed to control gas mains, flue-gas draft and other coke oven battery functions, based on SIMATIC S5 135U with InTouch visualisation and Industrial Ethernet connection
: Cooperation with Dodávky automatizace, a.s. Ostrava
Coke Oven Gas Desulphurisation
Koksovna Jana Švermy, Ostrava, Czech Republic, 1997 - 1998
Programming | Simatic, InTouch
: Delivery of a SIMATIC-based control system (5x S5 135U, 1x S5 155U, 1x S5 100U), including InTouch visualisation (5 operator stations) and Industrial Ethernet connection
: Continuous modifications of the control system during operation of the coke oven gas desulphurisation plant
: Cooperation with Hutní projekt Frýdek-Místek a.s., ElektroMar Ostrava a.s. and Elektromont Brno, a.s.
Hydros – Saw No. 2 Control System
Hydros, Český Těšín, Czech Republic, 1997
Programming | Simatic, InTouch
: Delivery of the control system for the second roller production line based on S5 95U, including extension of the existing InTouch visualisation
Cooling Bed No. 2 – Rolling Mill D
Třinecké železárny, Czech Republic, 1997
Programming | Simatic, OP15
: S5 95U based control system with OP15 operator panel
: Cooperation with Expim Český Těšín
Hydros – Saw No. 1 Control System
Hydros, Český Těšín, Czech Republic, 1997
Programming | Simatic, InTouch
: Delivery of the control system for the roller production line based on S5 95U, including InTouch visualisation
Continuous Casting – Emergency Heating
VSŽ Košice, Slovakia, 1997
Programming | Simatic
: Final delivery of the control system for emergency heating of continuous-casting tundishes at VSŽ (including field instrumentation)
: Cooperation with Vítkovice-Realizácia projektov, s.r.o.
Converter Gas Holder
Vítkovice, Czech Republic, 1997
Programming | Control Panel
: Visualisation of gas dispatching stations and converter gas holder control system based on Control Panel, including modem interconnection
: Control system delivery, cooperation with Expim Český Těšín and Třinecká společnost W&W s.r.o.
Water Management – Wastewater Recirculation
Třinecké železárny, Czech Republic, 1996 - 1997
Programming | Simatic, InTouch
: SIMATIC S5 135U based control system with InTouch visualisation
: Control system delivery, cooperation with Expim Český Těšín and Třinecká společnost W&W s.r.o.
Transfer Ladles
VSŽ Košice, Slovakia, 1996 - 1997
Programming | Simatic
: Final delivery of the control system (SIMATIC S5 95 U), including field instrumentation
: Cooperation with EZ Bratislava, R.A.T. Košice, Dodávky automatizace Ostrava and Vítkovice-Realizácia projektov, s.r.o.
Parallel Control of Two Cranes
Třinecké železárny, Czech Republic, 1996
Programming | Simatic
: Control system for two cranes in synchronous or individual mode (4x SIMATIC S5 95U in SINEC L2 network) – the first of its kind in the Czech Republic
: Control system delivery, cooperation with NOPO-Ing. Novotný, Hradec Králové
Coke Plant Water Management
Koksovna Jana Švermy, Ostrava, Czech Republic, 1996
Programming | Simatic, InTouch
: Water-management control system based on SIMATIC S5 135 U including InTouch visualisation
: Control system delivery, cooperation with Hutní projekt Frýdek-Místek, a.s.
Coke Plant Dedusting Station
Nová Huť, Ostrava, Czech Republic, 1996
Programming | Simatic
: Control system for the coke oven battery dedusting station based on SIMATIC S5 135 U
: Control system delivery, cooperation with Hutní projekt Frýdek-Místek, a.s.
Pipe Marking Machine
Železárny Veselí n.M., Czech Republic, 1996
Programming | Simatic, OP15
: S5 95U based control system with OP15 operator panel
: Cooperation with AutoCont Třinec and D5 a.s. Třinec
Cooling Bed No. 1 – Rolling Mill D
Třinecké železárny, Czech Republic, 1996
Programming | Simatic, OP15
: S5 95U based control system with OP15 operator panel
: Cooperation with Expim Český Těšín
Gas energy dispatch centre
Energetika Třinec, Czech Republic, 1996
Programming | InTouch, Simatic
: InTouch visualisation of the gas dispatch centre and migration of converter-gas processing control systems (gas holder, booster station, mixing stations) to this visualisation - S5 135 U (3964R protocol)
Converter Gas Cleaning Plants No. 1 and 2 – OXYVIT
Vítkovice, Czech Republic, 1996
Programming | InTouch
: InTouch based visualisation and process-data statistics for the gas cleaning plant with S5 135U (3964R protocol)
Horizontal and Vertical Ladle Heating
VSŽ Košice, Slovakia, 1995 - 1996
Programming, control system delivery | Simatic, InTouch
: SIMATIC S5 95 U based system for control of 1 vertical and 4 horizontal heating units
: InTouch visualisation + connection to the plant information system (2x S5 95U, 1x S5 135U)
: Cooperation with Dodávky automatizace, s.r.o. Ostrava and Vítkovice-Realizácia projektov, a.s. Košice
Waste Incineration Plant – Package Boiler House
Kaučuk Kralupy, Czech Republic, 1995
Programming | Simatic
: System based on SIMATIC S5 95 U, 3964R connection to the Hartmann & Braun process control system
: Turnkey control system delivery, cooperation with Vítkovice a.s. and Integral Engineering, Austria
Waste Incineration Plant – Cementation Station
Kaučuk Kralupy, Czech Republic, 1995
Programming | Simatic, InTouch
: Control system for processing final products from the waste incineration plant, based on SIMATIC S5 95 U and SINEC L1, with Wonderware InTouch visualisation
: Turnkey I&C and control system delivery, cooperation with Vítkovice a.s. and Integral Engineering, Austria
Mobile Heating Plant
Vítkovice, Czech Republic, 1995
Programming | Simatic
: Control system for steam distribution from the heating plant and boiler section of converter No. 2, based on SIMATIC S5 95 and SINEC L1
: 2x Master/Slave visualisation based on Wonderware InTouch
: Control system delivery, cooperation with Dodávky automatizace, s.r.o. Ostrava
Slab Continuous Casting – Emergency Tundish Heating
Vítkovice, Czech Republic, 1995
Programming | Simatic
: Control system based on SIMATIC S5 115 U
: Cooperation with REMER s.r.o. Třinec (I&C subcontract), turnkey delivery
Slab Continuous Casting – Ladle Drying and Heating
Vítkovice, Czech Republic, 1995
Programming | Simatic
: Control system based on SIMATIC S5 115 U
: Cooperation with REMER s.r.o. Třinec (I&C subcontract), turnkey delivery
Slab Continuous Casting – Water Management
Vítkovice, Czech Republic, 1995
Programming | Simatic
: Control system for continuous-casting water management based on SIMATIC S5 135 U, connected to the continuous-casting system via SINEC H1 network
: Control system delivery, cooperation with Vítkovice, Voest-Alpine Austria and Dodávky automatizace, s.r.o. Ostrava
Natural gas regulating station
Energetika Třinec, Czech Republic, 1994
Programming | Simatic
: SIMATIC S5 95 U-based control system connected to the SINEC L1 communication network
: Control system delivery, cooperation with REMER s.r.o. Třinec, turnkey delivery for PLYNOSTAV Pardubice
Chemical water treatment plant - water neutralisation
Energetika Třinec, Czech Republic, 1994
Programming | Simatic, Promotic
: Industrial PC-based system with MESIT I/O, using PROMOTIC control and visualisation software by MICROSYS s.r.o., Ostrava
: Cooperation with TV - ASRTP Třinecké železárny, a.s., Třinec
Chemical water treatment plant - horizontal sand filters
Energetika Třinec, Czech Republic, 1994
Programming | Simatic, Promotic
: Industrial PC-based system with MESIT I/O, using PROMOTIC control and visualisation software by MICROSYS s.r.o., Ostrava
: Cooperation with TV - ASRTP Třinecké železárny, a.s., Třinec
Heat exchanger station
Město Český Těšín, Czech Republic, 1994
Programming | Simatic
: SIMATIC S5 95 U-based heat exchanger station control system
: Control system delivery, cooperation with REMER s.r.o. Třinec (I&C delivery)
Automation of HV and LV substations
Energetika Třinec, Czech Republic, 1993 - 1994
Programming | Simatic, Promotic
: System based on 5x SIMATIC S5 135 U in SINEC H1, SINEC L1 and 3964R networks; PROMOTIC visualisation by Microsys Ostrava
Horizontal Ladle Heating
Třinecké železárny, Czech Republic, 1993
Programming | Simatic
: Control system for 4 burners based on SIMATIC S5 115 U
: Turnkey control system delivery
Natural Gas Regulating Station
Třinecké železárny, Czech Republic, 1993
Programming | Simatic
: Inlet natural-gas regulating station and heat exchangers for Třinecké železárny (SIMATIC S5 95 U), connected to the TŽ communication network
: Turnkey I&C and control system delivery for Plynostav Pardubice
AEBI Refractory Press Control
Třinecké železárny, Czech Republic, 1993
Programming | Simatic
: Control system for a press producing precision refractory shapes (SIMATIC S5 115 U)
: Cooperation with Projekce hydrauliky, Vítkovice, a.s.
Proportional Dosing – Sinter Plant II
Třinecké železárny, Czech Republic, 1993
Programming | Mesti, Promotic
: Industrial PC based system with MESIT I/O, visualisation and control using PROMOTIC software by MICROSYS, s.r.o.
General Overhaul of Converter No. 1
Vítkovice, Czech Republic, 1992 - 1993
Programming | Simatic
: Control system for the converter gas holder including gas mixing station (SIMATIC S5 135 U – part of the 3964 network, basic level); control system for converter No. 1 gas cleaning plant (SIMATIC S5 135 U – part of the 3964 network, basic level)
: Control system for the boiler section of converter No. 1 (SIMATIC S5 135 U – part of the 3964 network, basic level); hydraulic station of the 3-way valve for gas recovery at converter No. 1 (SIMATIC S5 115 U – part of the SINEC L1 network, basic level)
: Operator stations for the gas cleaning plant and boiler section of converter No. 1 (SIMATIC S5 135 U – part of the 3964 network, WF 470 visualisation, supervisory level)
: Cooperation with CLECIM and CEGELEC, France
Converter Gas Recovery
Vítkovice, Czech Republic, 1992
Programming | Simatic
: Control system for the converter gas holder including gas mixing station (SIMATIC S5 135 U – part of the 3964 network, basic level)
: Converter gas holder operator station (SIMATIC S5 135 U – part of the 3964 network, supervisory level)
: Cooperation with CLECIM and CEGELEC, France