References: International Projects
The complete list of completed projects is available in the menu Projects
TGW Safety Doors
TGW Logistics Group, Austria, 2025
Programming | Simatic, TIA portal
: Transfer point for conveyed material (4x double-leaf doors, 1x single-leaf door)
: Application software Simatic S7-1200, WinCC Unified Panel
Bukoza Energo - service activity
Bukoza Energo, Hencovce, Slovakia, 2023
Programming | Simatic, TIA portal
: Service activities for TG1 and TG3 turbines
: Application software Simatic S7-300, WinCC Comfort Panel
Technical Assistance – NDMC Hyderabad Coke Oven Plant, India
HUTNÍ PROJEKT FRÝDEK-MÍSTEK, India, 2022
: Technical assistance during implementation of coke oven control automation
Bioelectric power plant - external steam distribution
Energy Edge, Žarnovica, Slovakia, 2022
Programming | TIA portal
: Control of additional steam distribution
: Application software Simatic S7-300, WinCC RT Panel
Bioelectric power plant - visualisation replacement
Energy Edge, Žarnovica, Slovakia, 2022
Programming | TIA portal
: Replacement of the visualisation with WinCC RT
: Application software WinCC RT Advanced
Bukoza Energo - service activity
Bukoza Energo, Hencovce, Slovakia, 2021
Programming | Simatic, TIA portal
: Service activities for TG1 and TG3 turbines
: Application software Simatic S7-300, WinCC Comfort Panel
Bioelectric power plant - boiler repair
Energy Edge, Žarnovica, Slovakia, 2020
Programming | Simatic
: Line software modification (PLC, visualisation)
: Application software Simatic S7-400, visualisation InTouch SP
Operator station upgrade on TG3
Bukoza Energo, Slovakia, 2018
Programming | Simatic, TIA portal
: HW+SW upgrade of the WinCC RT operator station (SCADA) from 6.2 to 7.4
: WinCC Scada 7.4
Bioelectric power plant - boiler software modifications
Energy Edge, Žarnovica, Slovakia, 2018 - 2019
Programming | Simatic, InTouch
: Boiler software modification - PLC S7-400
: Application software Simatic S7-400, visualisation InTouch SP
TG3 overhaul
Bukoza Energo, Hencovce, Slovakia, 2017
Programming | Simatic, WinCC (Scada)
: Control system for regulation and protection of equipment in the TG3 turbine hall
: Visualisation in the DCS system
: Application software Simatic S7-300, WinCC
: Communication with ABB (IEC 61850)
: Commissioning and start-up
Four-position welding cell
Daimler, Poland, 2016 - 2017
Programming | Simatic, WinCC, Kuka
: Automation of a four-position robotic welding cell
: Application software Simatic S7-1500, WinCC
: Cooperation with KUKA robots
Two-position welding cell
Daimler, Poland, 2016 - 2017
Programming | Simatic, WinCC, Kuka
: Automation of a two-position robotic welding cell
: Application software Simatic S7-1500, WinCC
: Cooperation with KUKA robots
Primary power control - certification tests
Bukoza Energo, Hencovce, Slovakia, 2016
Programming | Simatic, WinCC (Scada)
: Preparation and execution of primary power control certification tests
: Application software Simatic S7-300, WinCC
Coke Oven Gas Desulphurisation
US Steel Košice, Slovakia, 2016
Supervision
: Start-up of the Claus reactor after general overhaul
: Controlled drying and heating of the reactor
Cooling towers
Bukoza Energo, Hencovce, Slovakia, 2016
Programming | Simatic, WinCC (Scada)
: Control system for cooling towers of the TG3 turbine condensing circuits
: Application software Simatic S7-300, WinCC
Turbogenerator protection control
Mondi Group, Ružomberok, Slovakia, 2016
Programming | Simatic, WinCC
: TG2 turbogenerator protection
: Application software Simatic S7-300, WinCC
: Communication with DCS via Modbus RTU
: Commissioning and start-up
TG1 start-up after overhaul
Bukoza Energo, Hencovce, Slovakia, 2015
Supervision | Simatic, WinCC (Scada)
: Commissioning and start-up of the turbogenerator after overhaul
Experimental Coke Oven
Thyssen Duisburg, Germany, 2015
Programming | Simatic, WinCC
: Control of an experimental coke oven for technological purposes
: Application software Simatic S7-300, WinCC
: Commissioning and start-up
Automation of MGU component production (1x KM300 injection moulding machine)
Continental, ChangShu, China, 2014 - 2015
Programming | Simatic, WinCC, Kuka
: Automation at the KM300 injection moulding machine for MGU cover production (Motor Gear Unit)
: Application software Simatic S7-300, WinCC (Continental Standard)
: Cooperation with a KUKA robot
: Commissioning and start-up
Automation of MGU component production (2x KM420 injection moulding machine)
Continental, ChangShu, China, 2014 - 2015
Programming | Simatic, WinCC, Kuka
: Automation at the KM420 injection moulding machine for MGU housing production (Motor Gear Unit)
: Application software Simatic S7-300, WinCC (Continental Standard)
: Cooperation with KUKA robots
: Commissioning and start-up
Heating and Cooling of Hood Furnaces
DUO BRASS Mils, Pákistán, 2014 - 2016
Programming | Simatic,WinCC
: Control of heating/cooling of hood furnaces
: Application software Simatic S7-300, WinCC
: Commissioning and start-up
Rolling Mill Control Upgrade
DUO BRASS Mils, Pákistán, 2014 - 2016
Programming | Simatic, WinCC
: Automation of the rolling stand
: Application software Simatic S7-300, WinCC
: Commissioning and start-up
Battery Tube robotic welding cells
Kirchhoff Polska, Poland, 2014
Programming | Simatic,WinCC
: Automation of a robotic welding cell
: Application software Simatic S7-300, WinCC
: Commissioning and start-up
Back-pressure turbine
TG Hajnówka, Poland, 2012 - 2013
Programming | Simatic, WinCC
: Back-pressure turbine, turbine commissioning
: PLC Simatic S7300
: Visualisation WinCC
6 MW turbogenerator control - regulation and protection
TG Nadia Chekka, Lebanon, 2012 - 2013
Programming | Simatic, WinCC (Scada)
: 6 MW turbogenerator (back-pressure turbine, upgrade and commissioning)
: PLC Simatic S7400
: Visualisation WinCC
Bioelectric power plant
Energy Edge, Žarnovica, Slovakia, 2011 - 2014
Programming | Simatic, Wonderware
: Application software for PLC Simatic S7-400 - boiler
: Application software for PLC Simatic S7-300 - transport
: Application software for PLC Simatic S7-300 - heat pumps
: Wonderware System Platform (InTouch, WHS, WIS) for boiler, turbine and transport
TG1 - turbogenerator control - regulation and protection
Bukoza Energo, Hencovce, Slovakia, 2011
Programming | Simatic, WinCC (Scada)
: TG1 turbogenerator - upgrade (software development and commissioning)
: 2x PLC Simatic S7300
: Visualisation WinCC
Coke Oven Gas Desulphurisation
U.S.Steel Košice, Slovakia, 2010 - 2011
Programming | Simatic, InTouch
: The most significant investment at U.S. Steel in 2010 – construction of two coke oven gas desulphurisation lines
: Responsibility for the control system and I&C scope of the project
: PLC Simatic S7-400, Wonderware Application Server (3 SP), InTouch visualisation, Historian Server
Charging Car for Coke Oven Battery No. 3
U.S.Steel Košice, Slovakia, 2009
Programming | Simatic
: Upgrade of the control system of charging car No. 1 for coke oven battery No. 3
: Simatic S7-300 control system
TG3 - turbogenerator control - regulation and protection
Bukoza Energo, Hencovce, Slovakia, 2008
Programming | Simatic, WinCC (Scada)
: Turbogenerator - upgrade (software development and commissioning)
: 1x Simatic S7400
: Visualisation WinCC
: Industrial Ethernet
Heating and Drying of Transfer Ladles
U.S.Steel Košice, Slovakia, 2008
Programming | Simatic, InTouch
: Control system upgrade (S5 -> S7, InTouch)
: 1x Simatic S7-300
: InTouch visualisation
: Industrial Ethernet
Particleboard Production Line
Dřevařský podnik Burgas, Bulgaria, 2008
Programming | Simatic
: 2x Simatic S7-400
: 1x Simatic S7-300
: Industrial Ethernet, Profibus DP
30 MW turbogenerator control - regulation and protection
Cukrovar Broadwater, Australia, 2008
Programming | Simatic, WinCC (Scada)
: 30 MW condensing turbine
: Turbine protection system (S7-400)
: Turbine control system (S7-400)
: WinCC visualisation
: Synchronisation with generator connection points
30 MW turbogenerator control - regulation and protection
Cukrovar Condong, Australia, 2007
Programming | Simatic, WinCC (Scada)
: 30 MW condensing turbine
: Turbine protection system (S7-400)
: Turbine control system (S7-400)
: WinCC visualisation
: Synchronisation with generator connection points
Turbogenerator protection - 36.2 MW condensing turbine
Papírny YFY GROUP, Yangzhou, China, 2007
Programming | Simatic, WinCC (Scada)
: Turbine protection system (S7-400)
: Turbine control system (S7-400)
: WinCC visualisation
: Synchronisation with generator connection points
: Modbus communication with the HV system
Sawdust Dryer
Dřevařský podnik Tarnovo, Bulgaria, 2007 - 2008
Programming | Simatic
: 6x PLC Simatic S7-300
: Industrial Ethernet, Profibus DP
Parallel operation of two 8.2 MW turbogenerators
Cukrovar Kayseri, závod Bogazliyan, Turkey, 2007
Commissioning | Simatic
: 2 back-pressure turbines, 8.2 MW, in parallel operation
: Supervision during sugar beet campaign start-up
Parallel operation of two 8.2 MW turbogenerators
Cukrovar Kayseri, závod Bogazliyan, Turkey, 2006 - 2007
Programming | Simatic, WinCC (Scada)
: Back-pressure turbines 8.2 MW (2 units)
: Turbine protection system (S7-400H)
: Turbine control system (S7-400H)
: Synchronisation with generator connection points
: WinCC visualisation (2 stations)
VW car body shop
Volkswagen Bratislava, Slovakia, 2004 - 2005
Programming | Simatic, Kuka
: Application software for Simatic S7-300
: Application software for KUKA robots
: Cooperation with Siemens
Car body shop - AUDI A3
Audi, Ingolstadt, Germany, 2002
Programming | Simatic, WinCC
: Application software for Simatic S7-400 for material handling and welding robot control
: Communication between welding robots (Interbus, Profibus)
: Siemens WinCC visualisation
: Cooperation with Siemens
HCl Regeneration Station
Baoshan Iron Steel, China, 1999
Programming | InTouch
: Delivery of InTouch visualisation software for the new regeneration station (3 operator stations + 1 engineering station)
: Cooperation with Autel a.s.
Refinery – LPG Storage Tanks
SOPC Suez, Egypt, 1998
Commissioning | Simatic
: Commissioning of instrumentation and control, comprehensive testing of the LPG storage tank technology
: Cooperation with TECHNOEXPORT Praha and Vítkovice, a.s.
Continuous Casting – Emergency Heating
VSŽ Košice, Slovakia, 1997
Programming | Simatic
: Final delivery of the control system for emergency heating of continuous-casting tundishes at VSŽ (including field instrumentation)
: Cooperation with Vítkovice-Realizácia projektov, s.r.o.
Transfer Ladles
VSŽ Košice, Slovakia, 1996 - 1997
Programming | Simatic
: Final delivery of the control system (SIMATIC S5 95 U), including field instrumentation
: Cooperation with EZ Bratislava, R.A.T. Košice, Dodávky automatizace Ostrava and Vítkovice-Realizácia projektov, s.r.o.
Horizontal and Vertical Ladle Heating
VSŽ Košice, Slovakia, 1995 - 1996
Programming, control system delivery | Simatic, InTouch
: SIMATIC S5 95 U based system for control of 1 vertical and 4 horizontal heating units
: InTouch visualisation + connection to the plant information system (2x S5 95U, 1x S5 135U)
: Cooperation with Dodávky automatizace, s.r.o. Ostrava and Vítkovice-Realizácia projektov, a.s. Košice