References: Metallurgy
The complete list of completed projects is available in the menu Projects
Sheet Pile Marking Equipment
Vítkovice STEEL a.s., Czech Republic, 2026
Programming | Simatic, TIA portál
: Sheet pile marking (production data + QR code) using REA JET marking equipment
: Application software Simatic S7-1500, WinCC Unified Panel
: Integration into the straightener control system
: Commissioning and start-up
MAGNEMAG Pipe Marking Line
Liberty Ostrava, Czech Republic, 2021 - 2022
Programming | Simatic, TIA portál
: Pipe marking line using coloured stripes and printing (stamping)
: Application software Simatic S7-1500, WinCC Comfort Panel
Boiler K14
ArcelorMittal Ostrava, Czech Republic, 2015
Programming | Simatic
: Participation in development of the K14 boiler control automation
: Application software for PLC Simatic S7-400H
: Commissioning and start-up
: General contractor VALMET
Ladle Furnace No. 2
ŽĎAS, Žďár n/S, Czech Republic, 2015
Programming | InTouch
: Upgrade of ladle furnace No. 2 technology
: Application software InTouch
Heating and Cooling of Hood Furnaces
DUO BRASS Mils, Pákistán, 2014 - 2016
Programming | Simatic,WinCC
: Control of heating/cooling of hood furnaces
: Application software Simatic S7-300, WinCC
: Commissioning and start-up
Rolling Mill Control Upgrade
DUO BRASS Mils, Pákistán, 2014 - 2016
Programming | Simatic, WinCC
: Automation of the rolling stand
: Application software Simatic S7-300, WinCC
: Commissioning and start-up
Reconstruction and Upgrade of Soaking Pits
Sochorová válcovna TŽ, Kladno, Czech Republic, 2011 - 2012
Programming | Simatic, InTouch
: Control of automatic heating of 12 soaking pit chambers according to 5 possible scenarios
: 2x Simatic S7-300, Profibus
: 2x InTouch visualisation
Heating and Drying of Transfer Ladles
U.S.Steel Košice, Slovakia, 2008
Programming | Simatic, InTouch
: Control system upgrade (S5 -> S7, InTouch)
: 1x Simatic S7-300
: InTouch visualisation
: Industrial Ethernet
Reconstruction of the Sawing Section
Sochorová válcovna TŽ, Kladno, Czech Republic, 2006 - 2007
Programming | Simatic, InTouch
: Optimisation of cooling bed movement control
: Drive upgrade in the discharge section
: Application software for Simatic S7-400
: InTouch visualisation
Third Saw for Hot Billet Cutting
Sochorová válcovna TŽ, Kladno, Czech Republic, 2005
Programming | Simatic, InTouch
: Application software for Simatic S7-300 – cooperation of two saws during simultaneous billet cutting
: Application software for InTouch visualisation
: Cooperation with Autel and Třinecký inženýring
Billet Ovality Measurement
Sochorová válcovna TŽ, Kladno, Czech Republic, 2003 - 2004
Programming | Simatic, InTouch
: Simatic S7-300 application software for movement control of the measuring-head manipulator according to the measuring plan
: InTouch visualisation including communication with the rolling mill MES (SQL Server)
: Cooperation with Třinecký Inženýring a.s.
Control System Upgrade – Stage 2
Sochorová válcovna TŽ, Kladno, Czech Republic, 2003
Programming | Simatic, InTouch
: Simatic S7-300 application software for control of the saw section, collecting bed and cooling beds
: Simatic S7-300 application software for material-flow tracking, replacement of relay panels and Simatic S3
: InTouch visualisation
: Cooperation with Třinecký Inženýring a.s. and Autel a.s.
Rolling Stand – Roll Adjustment
Sochorová válcovna TŽ, Kladno, Czech Republic, 2002 - 2003
Programming | Simatic, InTouch
: Simatic S7-400 application software for roll positioning control of stands 1, 2 and 3
: Simatic S7-400 application software for material-flow tracking
: InTouch visualisation
: Cooperation with Třinecký Inženýring a.s. and Autel a.s.
Converter Gas Holder Control System Upgrade
Energetika Třinec, Czech Republic, 2001
Programming | Simatic
: Delivery of SIMATIC S5 135U application software
: Cooperation with Energetika Třinec a.s.
General Overhaul of the Gas Mixing Station Control System
Energetika Třinec, Czech Republic, 2001
Programming | Simatic
: Delivery of SIMATIC S5 135U application software
: Cooperation with Energetika Třinec a.s.
Heat Treatment Line (Quenching and Tempering Furnaces)
Třinecké železárny, Czech Republic, 2001
Programming | Simatic, InTouch
: Delivery of SIMATIC S7-300 hardware and software (Profibus) + InTouch visualisation
: Communication S7-300 – CP541 – S5-115U
: Cooperation with Třinecký inženýring a.s.
Fine Scale Dewatering
Vítkovice, Czech Republic, 1999 - 2001
Programming, I&C delivery | Simatic, FactoryLink
: Delivery of a SIMATIC S7-400 based control system
: FactoryLink visualisation (US Data)
: I&C delivery
: Cooperation with Mariánskohorská a.s., Třinecká společnost W&W and Ingelectric a.s.
Rail Straightener
Třinecké železárny, Czech Republic, 1999
Programming | InTouch
: Delivery of InTouch visualisation software for the rail straightener (replacement of the existing visualisation)
: Cooperation with TŽ inženýring a.s.
HCl Regeneration Station
Baoshan Iron Steel, China, 1999
Programming | InTouch
: Delivery of InTouch visualisation software for the new regeneration station (3 operator stations + 1 engineering station)
: Cooperation with Autel a.s.
Secondary Dedusting of Converter K1
Vítkovice, Czech Republic, 1999
Programming | Simatic, Coros
: Delivery of SIMATIC S5 based control and I&C system, COROS visualisation (WF 470)
: Cooperation with Třinecká společnost W&W
Converter Gas Holder
Vítkovice, Czech Republic, 1999
Programming | ControlWeb
: New Control Web based visualisation, modification of gas mixing station control and new connection to rolling mills
Cooling Bed No. 2 – Rolling Mill D
Třinecké železárny, Czech Republic, 1997
Programming | Simatic, OP15
: S5 95U based control system with OP15 operator panel
: Cooperation with Expim Český Těšín
Continuous Casting – Emergency Heating
VSŽ Košice, Slovakia, 1997
Programming | Simatic
: Final delivery of the control system for emergency heating of continuous-casting tundishes at VSŽ (including field instrumentation)
: Cooperation with Vítkovice-Realizácia projektov, s.r.o.
Converter Gas Holder
Vítkovice, Czech Republic, 1997
Programming | Control Panel
: Visualisation of gas dispatching stations and converter gas holder control system based on Control Panel, including modem interconnection
: Control system delivery, cooperation with Expim Český Těšín and Třinecká společnost W&W s.r.o.
Water Management – Wastewater Recirculation
Třinecké železárny, Czech Republic, 1996 - 1997
Programming | Simatic, InTouch
: SIMATIC S5 135U based control system with InTouch visualisation
: Control system delivery, cooperation with Expim Český Těšín and Třinecká společnost W&W s.r.o.
Transfer Ladles
VSŽ Košice, Slovakia, 1996 - 1997
Programming | Simatic
: Final delivery of the control system (SIMATIC S5 95 U), including field instrumentation
: Cooperation with EZ Bratislava, R.A.T. Košice, Dodávky automatizace Ostrava and Vítkovice-Realizácia projektov, s.r.o.
Parallel Control of Two Cranes
Třinecké železárny, Czech Republic, 1996
Programming | Simatic
: Control system for two cranes in synchronous or individual mode (4x SIMATIC S5 95U in SINEC L2 network) – the first of its kind in the Czech Republic
: Control system delivery, cooperation with NOPO-Ing. Novotný, Hradec Králové
Pipe Marking Machine
Železárny Veselí n.M., Czech Republic, 1996
Programming | Simatic, OP15
: S5 95U based control system with OP15 operator panel
: Cooperation with AutoCont Třinec and D5 a.s. Třinec
Cooling Bed No. 1 – Rolling Mill D
Třinecké železárny, Czech Republic, 1996
Programming | Simatic, OP15
: S5 95U based control system with OP15 operator panel
: Cooperation with Expim Český Těšín
Converter Gas Cleaning Plants No. 1 and 2 – OXYVIT
Vítkovice, Czech Republic, 1996
Programming | InTouch
: InTouch based visualisation and process-data statistics for the gas cleaning plant with S5 135U (3964R protocol)
Horizontal and Vertical Ladle Heating
VSŽ Košice, Slovakia, 1995 - 1996
Programming, control system delivery | Simatic, InTouch
: SIMATIC S5 95 U based system for control of 1 vertical and 4 horizontal heating units
: InTouch visualisation + connection to the plant information system (2x S5 95U, 1x S5 135U)
: Cooperation with Dodávky automatizace, s.r.o. Ostrava and Vítkovice-Realizácia projektov, a.s. Košice
Mobile Heating Plant
Vítkovice, Czech Republic, 1995
Programming | Simatic
: Control system for steam distribution from the heating plant and boiler section of converter No. 2, based on SIMATIC S5 95 and SINEC L1
: 2x Master/Slave visualisation based on Wonderware InTouch
: Control system delivery, cooperation with Dodávky automatizace, s.r.o. Ostrava
Slab Continuous Casting – Emergency Tundish Heating
Vítkovice, Czech Republic, 1995
Programming | Simatic
: Control system based on SIMATIC S5 115 U
: Cooperation with REMER s.r.o. Třinec (I&C subcontract), turnkey delivery
Slab Continuous Casting – Ladle Drying and Heating
Vítkovice, Czech Republic, 1995
Programming | Simatic
: Control system based on SIMATIC S5 115 U
: Cooperation with REMER s.r.o. Třinec (I&C subcontract), turnkey delivery
Slab Continuous Casting – Water Management
Vítkovice, Czech Republic, 1995
Programming | Simatic
: Control system for continuous-casting water management based on SIMATIC S5 135 U, connected to the continuous-casting system via SINEC H1 network
: Control system delivery, cooperation with Vítkovice, Voest-Alpine Austria and Dodávky automatizace, s.r.o. Ostrava
Horizontal Ladle Heating
Třinecké železárny, Czech Republic, 1993
Programming | Simatic
: Control system for 4 burners based on SIMATIC S5 115 U
: Turnkey control system delivery
Natural Gas Regulating Station
Třinecké železárny, Czech Republic, 1993
Programming | Simatic
: Inlet natural-gas regulating station and heat exchangers for Třinecké železárny (SIMATIC S5 95 U), connected to the TŽ communication network
: Turnkey I&C and control system delivery for Plynostav Pardubice
AEBI Refractory Press Control
Třinecké železárny, Czech Republic, 1993
Programming | Simatic
: Control system for a press producing precision refractory shapes (SIMATIC S5 115 U)
: Cooperation with Projekce hydrauliky, Vítkovice, a.s.
Proportional Dosing – Sinter Plant II
Třinecké železárny, Czech Republic, 1993
Programming | Mesti, Promotic
: Industrial PC based system with MESIT I/O, visualisation and control using PROMOTIC software by MICROSYS, s.r.o.
General Overhaul of Converter No. 1
Vítkovice, Czech Republic, 1992 - 1993
Programming | Simatic
: Control system for the converter gas holder including gas mixing station (SIMATIC S5 135 U – part of the 3964 network, basic level); control system for converter No. 1 gas cleaning plant (SIMATIC S5 135 U – part of the 3964 network, basic level)
: Control system for the boiler section of converter No. 1 (SIMATIC S5 135 U – part of the 3964 network, basic level); hydraulic station of the 3-way valve for gas recovery at converter No. 1 (SIMATIC S5 115 U – part of the SINEC L1 network, basic level)
: Operator stations for the gas cleaning plant and boiler section of converter No. 1 (SIMATIC S5 135 U – part of the 3964 network, WF 470 visualisation, supervisory level)
: Cooperation with CLECIM and CEGELEC, France
Converter Gas Recovery
Vítkovice, Czech Republic, 1992
Programming | Simatic
: Control system for the converter gas holder including gas mixing station (SIMATIC S5 135 U – part of the 3964 network, basic level)
: Converter gas holder operator station (SIMATIC S5 135 U – part of the 3964 network, supervisory level)
: Cooperation with CLECIM and CEGELEC, France